NEW 21 INCH ISPIRI FFR1D DIRECTIONAL ALLOY WHEELS IN CARBON GRAPHITE WITH DEEPER CONCAVE 10.5" REARS 5x120

New set of four 21" Ispiri FFR1D Directional Multi-Spoke alloy wheels, finished in Carbon Graphite with deeper concave rears

The Ispiri FFR1D is produced using the advanced German flow forming process. The wheel is initially cast using our low pressure heat treated process increasing strength and durability. The cast wheel is then transferred to the flow forming drum where a combination of heat and pressure applied by three hydraulic rollers compress, stretch and form the wheel barrel to a pre-defined thickness and desired profile. 

The condensing and stretching of the metal alters the very nature of the aluminium to produce a wheel barrel that is thinner, stronger and significantly lighter (roughly 25%) than a non-flow form cast wheel, with enhanced strength and reduced weight properties comparable to higher priced forged aluminium wheels.

They are available in 21" x 9" et32 front and 21" x 10.5" et42 rear with a 5x120 pcd.

We can supply competitively priced tyre packages which will come fitted and balanced so the wheels are ready to mount onto your vehicle, please click the 'contact us about this product' to enquire.

Please note: We strongly advise against using run flat tyres with any alloy wheel.  Run flat tyres have a very hard side wall and this combined with the condition of the UK roads will increase the likelihood of alloys cracking.