Used 20 Inch Oems Fs6 Alloy Wheels Near Unmarked In Silver With Machine Polished Face And Deeper Concave 10" Rears 5x112

Name: Used 20 Inch Oems Fs6 Alloy Wheels Near Unmarked In Silver With Machine Polished Face And Deeper Concave 10" Rears 5x112
Brand: OEMS Alloy Wheels
SKU: 5779
Price: 599.00 GBP
Availability: InStock

Ad ID: 5779

£599.00

Qty:

Available to order now Or call 01323 647222

CLICK HERE to CONTACT US ABOUT THIS PRODUCT

In stock

Please select the above options to enable 'Add to Basket'

Available to order now Or call 01323 647222

CLICK HERE to CONTACT US ABOUT THIS PRODUCT

Manufacturer
OEMS Alloy Wheels

Ad ID
5779

Diameter
20"

Colour
SILVER

PCD
5x112

Width
8.5" FRONT / 10" REAR

Offset
ET38

Center Bore
73.1

Load Rating
700kg

Description:

Used set of four 20" OEMS FS6 Y Spoke Alloy Wheels finished in Silver wih Machine Polished Face and very deep Concave 10" Rears.

These have been used for a short period of time and as the pictures show still look new, just a small mark to the edge of one of them as pictures shows.

They are 20" x 8.5" et38 front and 10" et38 rear with 5x112 pcd

We can supply competitively priced tyre packages which will come fitted and balanced so the wheels are ready to mount onto your vehicle, please click the 'contact us about this product' to enquire.

Please note: We strongly advise against using run flat tyres with any alloy wheel. Run flat tyres have a very hard side wall and this combined with the condition of the UK roads will increase the likelihood of alloys cracking.

Our standard structural warranty on wheels is 12 months. We can only provide 3 month warranty on Polished or Diamond Cut wheel finishes. Warranty is void in cases where wheels have suffered damage from stone-chips, kerbing, neglect or other 3rd party causes. We strongly advise wheels that have Polished or Diamond Cut finishes are not used during the wet/winter months. We advise they are only used as fair weather wheels and show use. All our used wheels carry no warranty or guarantee.

CLICK HERE for SHIPPING CHARGES We ship almost anywhere in the world, find out now what it will cost, see our detailed shipping charges.

We also offer TYRE PACKAGES Click here to find out more about the tyre packages that we are able to supply.

Information Regarding Polished/Lacquered Wheels Finishes

We can only provide 3 month warranty on Polished or Diamond Cut wheel finishes. Warranty is void in cases where wheels have suffered damage from stone-chips, kerbing, neglect or other 3rd party causes. We strongly advise wheels that have Polished or Diamond Cut finishes are not used during the wet/winter months. We advise they are only used as fair weather wheels and show use.

A Polished/Lacquered wheel finish is naturally vulnerable and the longevity of the finish is affected by stone-chips, salt/grit during winter months and kerbing etc. If the lacquer is in anyway broken we would advise purchasing a clear lacquer to paint over the affected area, keeping it sealed. There are also good wheel waxes on the market that can be used on the polished areas to act as a barrier helping to extend the life of the finish. We would also advise to only use a gentle soap solution for cleaning and avoid all acid- based solutions.